In this guide you will learn how to replace the battery inside the wearable call button.
5 min task
What
The wearable call button lets residents request assistance. It’s a small device that can be worn on the wrist or around the neck. It connects directly to any Nobi light it is nearby. The button works anywhere within range and alerts care staff through the standard Nobi escalation process.
Why
The button gives residents an easy way to ask for assistance, even before a fall happens. It’s especially helpful for those who are still mobile but feel unsteady or need extra confidence.
If the button stops working or doesn’t respond when pressed, the battery may need replacing. Replacing it on time ensures the resident can always reach out when they need help.
Detailed steps
Changing the batteries in the Wearable Call Button:
- Hold the button face-up.
- Turn the top part of the button counterclockwise to unscrew the front from the back.
- Inside, you’ll see a small electronic board with two screws.
- Use a 00 Phillips screwdriver to remove the two small screws.
- Take out the board to expose the battery compartment.
- Remove the old battery from the slot.
- Insert a new CR2032 lithium 3V battery into the same slot.
- Place the board back into the casing.
- Screw the two small screws back into place.
- Screw the front of the button casing back on by turning it clockwise.
To learn more about the Wearable Call Button, visit our article here.
For information on how to pair the Wearable Call Button to a resident, visit our guide here.
Still need help? Contact Nobi Support.