The following items need to be open outwardly:
# Cloud connection
*.nobi.cloud and nobi.cloud: port 443 (TCP)
*.nobi.cloud: port 5671 (TCP)
# NTP
time1.google.com, time2.google.com, time3.google.com, time4.google.com: port 123 (UDP)
# Debugging
*.nobi.cloud: port 2222
# SIP signalling
nobi.sip.us1.twilio.com: port 5060 (TCP + UDP)
nobi.sip.us1.twilio.com: port 5061 (TCP)
# SIP media
168.86.128.0/18: port range 10.000-60.000 (UDP)
# Software updates
hosted.mender.io: port 443 (TCP)
s3.amazonaws.com: port 443 (TCP)#
c271964d41749feb10da762816c952ee.r2.cloudflarestorage.com: port 443 (TCP)
For WiFi - the frequency bands :
- Nobi gen 1: 802.11b, g (2.4GHz) and ac (5GHz). 802.11n is not supported.
- Nobi gen 2: 802.11b, g (2.4GHz) and ac, n (5GHz).
The following types of authentication are possible:
- Open network
- WPA Personal
- WPA Enterprise (only username and password)
This is the info about the strength - minimum for us it is -67db
-30 db: This is the maximum signal strength. If you have this measurement, you are likely standing right next to the access point.
-50 db: This is considered an excellent signal strength.
-60 db: This is a good signal strength.
-67 db: This is a reliable signal strength. This is the minimum for any online services that require a reliable connection and Wi-Fi signal strength.
-70 db: This is not a strong signal strength. You may be able to check your email.
-80 db: This is an unreliable signal strength. You may be able to connect to your network, but you will not support most online activity.
-90 db: This is a bad signal strength. You are not likely to connect to internet at this level.
you can check this on your smartphone with Wifi analyzer
0
0
Was this article helpful?
0 out of 0 found this helpful
Add comment
Article is closed for comments.