In this guide you will learn how to replace the battery inside the Nobi Badge and keep it working properly.
3 min task
What
The Badge registers when a caregiver is near a room with a Nobi light. It shows who entered a room, when, and for how long. This makes care moments visible and helps improve daily support.
Why
The Badge makes it clear when and where care was given. It helps teams work better together and reduces the need for manual reporting.
If the Badge stops responding or no longer shows a caregiver’s presence, the battery might need to be replaced. Replacing it quickly avoids missing important care information.
Detailed steps
Changing the batteries in the Nobi Badge.
- Locate the a small notch on the bottom edge of the badge.
- Using a flat plastic tool like a guitar pick, insert the plastic pick into the notch and gently pry until you hear two clicks. (NOTE: Do not use a metal tool or screwdriver—this can damage the casing.)
- Slide the pick along the edge. You’ll hear more clicks as more of the casing loosens. Continue sliding the pick around the edges until all sides are open.
- Inside the Badge, remove the CR3032 lithium 3V battery and insert a new one. Make sure the battery is placed in the correct direction.
Line up both halves of the Badge and press firmly around the edges until all sides click back together.
To learn more about Badges, visit our article here.
For information on pairing the badge to a user using the web application, visit our guide here.
Still need help? Contact Nobi Support.