How to Configure Nobita Sensitivity

In this guide, you will learn about the sensitivity feature of your Nobita Gen 2 light and how to adjust it.

2 min task

What

When the automated lighting feature is enabled on a Nobita, the light will automatically turn on when movement is detected. You can adjust the sensitivity to control how far Nobita looks for movement. A higher sensitivity means the light will react to movement from farther away. The lower the sensitivity, the closer you have to be for the light to turn on. This is only possible on a Nobita GEN 2 light. 
Want to know which one you have? Check out this page for all types of lights.

Why

Sometimes the light can turn on when there's movement in the other room. If this is not what you want, you can decrease the sensitivity so that it will only turn on when you enter the room with the Nobita.

Detailed steps

Changing the sensitivity of the Nobita

Changing the sensitivity of the Nobita is simple and can be done at room level.

1. Click on Housing units from the left menu bar.
   

2. Click Edit next to the housing unit containing your Nobita.
   

3. Navigate to Rooms.
   

4. Click on the three dots next to the room your Nobita is in.
   

5. Click Set sensitivity.
   

6. To increase or decrease the sensitivity, click the + or - icons.
   

7. Click Back.
   

You have now changed the sensitivity of your Nobita. 

Still have questions? Contact Nobi Support.